DT-HiQ Programmer

Specifications :

• Support various of MCS-51 microcontroller, such as :
  AT89C51, AT89C52, AT89C55 (5V or 12V programming voltage), AT89LV51, AT89LV52, AT89LV55, AT89CDT-1051(U), AT89C2051, AT89C4051, AT89(L)S51, AT89(L)S52, AT89(L)S53, AT89(L)S8252, AT89C51RC, AT89C55WD.

• Support various of AVR 8-bit Series microcotroller, such as :
  AT90S1200, AT90S2313, ATtiny2313, AT90S8515, AT90S8535, ATmega8515(L), ATmega8535(L), ATmega16(L), ATmega162(V).

• Support Serial EEPROM 24C Series, such as :
  24C01(A), 24C11, 24C02(A), 24C04(A), 24C08(A), 24C16(A), 24C164, 24C32(A), 24C64(A/B), 24C(S)128, 24C256, 24C512, 24C1024.

• Support Serial EEPROM 25 Series, such as :
  25010A, 25020A, 25040A, 25080A, 25160A, 25320A, 25640A, 25128A, 25256A.

• Support Serial EEPROM 93C Series, such as :
  93C46(A/C), 93C56(A), 93C66(A), 93C86(A).

• Support EEPROM 28C Series :
  28C010, 28C040, 28C16, 28C64(B), 28C256.

• 12VDC (200mA) power supply.

• 57600bps UART RS-232 by DB9 Connector.

• Uses ZIP socket for target IC.

• Available converter socket for 40 Pin AVR microcontroller and 20 Pin microcontroller.

• Converter socket sell separately.

• Comes software for Windows 95/98/2K/ME/XP/7/8

Includes :

• 1x Board DT-HiQ Programmer board.

• 1set Converter Socket for 20 pin MCS-51, 20 pin 8-bit AVR, and 40 pin 8-bit AVR.

• 1x voltage adaptor 220 VAC to 12 VDC ( Optional ).

• 1x serial cable RS-232.