Bahasa Indonesia English Language

DT-SENSE Thermopile Sensor Array is a system of intelligent sensors that can measure the temperature of an object without direct contact with the object being measured. Measurement based on intensity of infrared radiation from the object being measured.
This system consists of a thermal sensor array and the primary module for microcontroller-based retrieval and processing of data. The output of this system in the form of digital data that shows the value of the temperature in units of ° C which can be accessed via the UART TTL interface and I ² c.

Example application of this system is to detect flame candles, measure the temperature of the bulb, burner, solder, or other objects in a non-contact.


  • 6 cm (L) x 5.5 cm (W) x 2 cm (H)
  • Sensor module: 3 cm (L) x 1,9 cm (W) x 1 cm (H)
  • Product Detail
  • Download
  • Application Note


  • Can measure the temperature of an object by measuring range 0 ° C to 100 ° c.
  • Operate at room temperatures of 0 ° C – 60 ° C.
  • The Sensor does not need to be direct contact with the object being measured.
  • Thermopile array sensor accuracy ± 2 ° c.
  • Output in the form of digital data that has shown the value of temperature in units of ° c.
  • Visibility sensor thermopile 41 ° x 6 ° (8 per pixel).
  • There are 8 thermopile sensor channel, as well as a thermistor to measure the temperature of the room.
  • Able to detect fire or a candle bulb 15W of heat in a room temperature of 20 ° C at a maximum distance of 200 cm from the eye sensor.
  • Need power supply power supply 4, 8V-5, 4V DC or 9V-12V DC (via on-board regulator).
  • Equipped with an indicator of power and voltage polarity protection.
  • Line Input/Output compatible with TTL and CMOS voltage levels.
  • Equipped with a TTL UART interface (38400bps) and I ² C (bit rates up to 100 kHz).
  • There are 2 connectors for standard servo motor that can be used to process the autoscan and expansion areas reading of the sensor.
  • You can cascade up to 8 modules in one line I ² c.
  • Terminal for the SCL and SDA will simplify the process of cascade module for I ² c.
  • The sensor module is separate from the main module so that the placement of the sensors can be more flexible.
  • There is a sample program using the CodeVisionAVR.



  • 1x DT-SENSE Thermopile Sensor Array.
  • 1x Sensor Cable along with the Thermopile ± 50 cm.
  • 1x Quick Start.
  • 1x DVD.

Application Note Table

Article File Desc date
No data available in table