February 16, 2022
-
Supports
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design -
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design
DT-I/O Neo RS-232 to RS-485 Converter
DT-I/O product
*) DISCONTINUE
DT-I/O Neo RS-232 to RS-485 Converter is a 2 ways UART converter which can be uses to RS-232 to RS-485 converter, TTL to RS-232 Converter or TTL to RS-485 Converter. This module provide manual or automatic control and support half-duplex or full-duplex on RS-485 interface. This modulse also provide CTS and RTS function as flow control on RS-232 or TTL interface.
Dimension : 7,2 cm (L) x 6 cm (W) x 1,8 cm (H)
- Product Detail
- Download
- Application Note
Specifications :
- Three option of two ways conversion :
- TTL/RS-232.
- TTL/RS-485.
- RS-232/RS-485.
- Support 1200 - 115200bps
- Can be used as DCE (Data Communication Equipment) or DTE (Data Terminal Equipment).
- Support CTS and RTS function.
- Support manual or automatic flow control for RS-485 by jumper configuration.
- Available jumper configuration for automatic baudrate on RS-485.
- Support Half and Full Duplex.
- Two LED for Tx dan Rx indicator and one LED power.
- Uses RJ-45 connector for RS-485 port or Use 5-pin terminal connector for RS-485.
- Uses RJ-12 for RS-232 port.
- 5VDC input voltage (regulated).
- Comes with on-board 5VDC voltage regulator for external power supply 9VDC -12VDC.
- Fully compatible with DT-AVR Low Cost Series and another mcrocontroller modules.
Includes :
- 1x DT-I/O Neo RS-232 TO RS-485 Converter.
- 1x Serial cable.
Application Note Table
| Article | File | Desc | date |
|---|---|---|---|
| |
AN171.zip | [AN171] Smart Monitoring and Control System dengan menggunakan jalur komunikasi RS-485This application note will explain how to build a simple smart monitoring system. This application note uses DT-I/O USB to UART Converter, DT-I/O NEO RS-232 to RS-485 Converter, DT-I/O Neo Relay Board, DT-Sense Barometric Pressure & Temperature Sensor, DT-AVR Low Cost Micro System, and DT-AVR Low Cost Nano System. |
28-04-2014 |
| |
AN164.zip | [AN164] Komunikasi Jarak Jauh antara 2 PC dengan RS-485This application note will explain how to build a RS-485 communication between 2 PCs. This application note uses DT-I/O USB to UART Converter and DT-I/O NEO RS232 to RS485 Converter. |
28-04-2014 |
Raspberry Pi Home Remote App Kit
June 05, 2018
April 12, 2017
April 12, 2017
June 02, 2016
June 02, 2016
June 02, 2016
April 27, 2016
