February 16, 2022
-
Supports
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design -
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design
DT-I/O Relay Board Ver 2.0
DT-I/O product
DT-I/O Relay Board Ver 2.0 is a relay board which has been equipped with ULN2803A as the current darlington driver. Fully compatible with DT-51 Low Cost Series, DT-AVR Low Cost Series, DT-51 Minimum Syste, DT-51 EptraFuz, DT-BASIC Series, and another microcontroller.
Dimension : 14,2 cm (L) x 8,6 cm (W) x 3 cm (H)
- Product Detail
- Download
- Application Note
Specifications :
- 8 SPDT Relays (coil voltage : 12V, contact rating : 250VAC/1A)
- Terminal Common (COM), Normally Open (NO) and Normally Close (NC) for each relay.
- Comes with filter to reduce noise.
- TTL/CMOS input level voltage.
- Uses ULN2803A as the current driver which has been equipped with supprsesion diode (bult in) to prevent kickback current.
- Available free pad for additional MOV (Metalic Oxide Varistor).
Includes :
- 1x DT-I/O Relay Board Ver 2.0 - 1201.
Optional Products :
- DT-I/O Relay Board Ver 2.0 - 1210 (#991-117) [DISCONTINUED]
Uses 12V relay and 10A 240VAC for contact rating. - DT-I/O Relay Board Ver 2.0 - 0506 (#991-118)
Uses 5V relay and 6A 250VAC for contact rating.
Application Note Table
| Article | File | Desc | date |
|---|---|---|---|
| |
AN99.zip | [AN99] PC Controlled RelayThis application note will explain how to use a computer to control relay. This application note uses PC-Link Serial PPI and DT-I/O Relay Board v2.0. |
14-09-2016 |
| |
AN204.zip | [AN204] Automatic Relay Control Based Google CalendarThis application note will explain how to build an automatic relay control based system. This application note uses DT-I/O TCP/IP To UART Converter, DT-AVR ATMEGA128L Bootloader Micro System, DT-I/O I2C Peripheral, and DT-I/O Relay Board Ver 2.0-1201 |
28-04-2014 |
| |
AN192.zip | [AN192] Web Based Temperature Monitoring SystemThis application note will explain how to build web based temperature monitoring system. This application note uses DT-AVR Low Cost Micro System, DT-Sense Temperature Sensor, and DT-I/O TCP/IP to UART Converter. |
28-04-2014 |
| |
AN146.zip | [AN146] Programmable Relay BoardThis application note will explain how to use DT-I/O Relay Board Ver 2.0 as programmable relay board. This application note uses DT-51 Low Cost Micro System, DT-I/O I2C Peripheral (consists of serial EEPROM and RTC DS1307), and DT I/O Relay Board Ver 2.0 (could be changed to DT-I/O Neo Relay Board). |
28-04-2014 |
| |
AN139.zip | [AN139] AVR Simple Relay ControlThis application note will explain how to control relay using microcontroller module. This application note uses DT-AVR Low Cost Nano System / Low Cost Micro System and DT-I/O Relay Board ver 2.0. |
28-04-2014 |
| |
AN108.zip | [AN108] VB5 Relay ControllerThis application note will explain how to use PC-Link Serial PPI. This application note uses PC-Link Serial PPI and DT-I/O Relay Board v2.0. |
25-04-2014 |
Raspberry Pi Home Remote App Kit
June 05, 2018
April 12, 2017
April 12, 2017
June 02, 2016
June 02, 2016
June 02, 2016
April 27, 2016
